Atomstack M100 fits the following models:

X7 Pro, X7 40W
X20 Pro, S20 Pro, A20 Pro
A10 Pro, S10 Pro
A5 20W, A5 30W, A5 M30, A5 Pro, A5 M40, A5 Pro+, A5 M50, A5 M50 Pro

Description:

The M100 laser module can be installed on any engraving machine model of Atomstack5W series and 10W series (A10Pro/S10Pro/X7Pro), just use the corresponding adapter board, and it can be used without any additional settings.

Comes with a set of Atomstack air assist kits, which can greatly optimize your artistic creation and work. It can not only improve work efficiency, but also achieve flawless cutting. It is the best partner of your laser.

If you own other brands of engravers, such as Ortur, NEJE, Two-Trees, etc., you can also install our Atomstack M100 laser module, which comes with a free adapter in the box.

Higher laser power, faster engraving speed! NEW ATOMSTACK M100 20W four Ultrafine Compression Spot Laser Module: Can be used for laser cutting machine, laser engraving machine, CNC, DIY laser. Upgrade high quality fixed focus laser, no need to focus. The engraving speed is 200% higher than other 10W lasers..

Laser module Specification:

Brand	Atomstack
Model	M100
Optical Output Power	20-21W
Product Material	Aluminum 6061 Anode
Housing Size	1406560mm
Circuit Board Size	44*52mm
Circuit Board	V/PWM Modulation Board
Wire Rod	22# 2P2.54 Terminal Reverse Wire 80mm
Optical Lens	φ6/glass
Fan	24V
Laser Beam Mode	Spot
Working Mode	Pulse Work
Lightspot Size	0.08*0.1mm
Working Time	10000H
Working Temperature	0℃~70℃
Storage Temperature	一40℃~85℃
Sintering Temperature	2000~2400℃
Product Net Weight	715g

Items	Symbol	Min	Typ	Max	Unit	Condition
Optical Output Power	Po		9.5	10	W	24V Power
Working Current	Iop	/	2.9	3.2	A
Operating Voltage	Vop	/	24	/	V
Laser Wavelength	λp		455	460	nm
Electric Power	Wl	/	69.6	76.8	W

Air assist kits Specification:

Brand	Atomstack
Model	F30
Parameter	10-30L/Min (Adjustable airflow speed)
Noise Decibel	60dB
Package Weight	1KG

Features:

It can be used for laser cutting machine, laser engraving machine, CNC, DIY laser.
Laser protective cover: The laser is equipped with a protective cover to protect the eyes of the user without the need to wear additional protective glasses. At the same time prevent pets from grabbing the laser spot.
Made of aluminum, strong and durable.
Upgraded high quality fixed-focus laser, no need to focus.
Aviation aluminum TTL driver board with cooling fan can ensure continuous long time work.
Engravable materials: wood, bamboo, cardboard, plastic, leather, PCB board, aluminum oxide, non-reflective electroplating layer and lacquered metal, after blackening Utility knife.
Cutable material: cardboard, non-woven fabric, veneer, acrylic, some thin plastic board.
0.08*0.1mm Fourcompression spot light coupling technology makes engraving more powerful

and precise .

Engraving speed is 200% higher than other 10W lasers.
High energy can cut 8.5mm thickness plates at one time.
The laser sintering temperature is 2400 degrees, the effect of engraving metal is better.
The laser has a built-in horizontal gyroscope anti-tip protection device, and it stops working when the tilt angle is 20°.
The wind-collecting hood can clean the smoke and dust to protect the lens to avoid laser energy attenuation.
The transfer circuit board is compatible with 95% of laser engraving machines on the market，Including Atomstack, ortur, Neje, twotree, etc.

CAUTIONS:

The laser light emitted by the laser module is likely to injure persons'eye, so do not directly gaze its end surface and wear appropriate safety glasses to prevent laser light when it is working.
Laser module needs an appropriate laser driver(PCB). When the laser module connects with power supply, please set the output voltage to zero. The adjustment of the current should be slowly increased or decrease to avoid damaging the device.
Keep the device working or storing in a dry environment. The anti-dust grade is over one million, in order to prevent dust inside the lens to affect the laser dot shape.
Working at high temperatures will increase the threshold current, reduce conversion efficiency and speed up the aging of the device.
When output power is higher than it's specific parameter of operation, it will accelerate the aging of the device.
When the operation temperature of the laser diode is over 70degree, please do well heat dissipation of it.
This laser module is an electrostatic sensitive device. Please make sure ground yourself or wear an antistatic wrist strap before you take it.

Package Included:

1	M100 Laser Module
1	PCB Circuit Board
1	Compatible Plate（A5 series and 10W series use different adapter boards, please pay attention to the distinction）
1	Fixed Focus Plate
1	Connection Line
1	Wrench
6	Screws
1	Power Supply
1	Air assist kit

Filter and sort 41 products

Cart

Select options